Megajolt Spark Plug Conversion

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
damunk
Posts: 65
Joined: Mon Aug 05, 2013 8:44 pm

Megajolt Spark Plug Conversion

Post by damunk »

From trigger-wheels I got the coil pack with the converter pieces so I can use existing spark plugs to fit the megajolt coil pack. pic below.

http://www.autosportlabs.org/files/sparkconv_205.jpg

I don't get it. The brass connector doesn't fit in the rubber. And even if it did, it would not touch the gold connections on the coil pack.

If I turn the brass connector vertical and put it into the coil pack then it is too long and you can't clip the rubber onto the coil pack. Are you supposed to cut them down?
Attachments
sparkconv.jpg
sparkconv.jpg (15.66 KiB) Viewed 4897 times

cng1
Posts: 282
Joined: Mon Dec 06, 2004 7:56 pm
Contact:

Post by cng1 »

Hi,

You should have got some instructions with the adaptors which explain how you fit them but if not let us know and we can send you another copy of them.

The terminal fits in the rubber with a 90 degree bend formed at the indentation just below the cable crimping tabs. Does that make sense?
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com

damunk
Posts: 65
Joined: Mon Aug 05, 2013 8:44 pm

Post by damunk »

cng1 wrote:Hi,

You should have got some instructions with the adaptors which explain how you fit them but if not let us know and we can send you another copy of them.

The terminal fits in the rubber with a 90 degree bend formed at the indentation just below the cable crimping tabs. Does that make sense?
Got it. Don't cut them. Bend the bitches :D

Post Reply