RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
hard limiter
Author Message
Reply with quote
Post hard limiter 
hello everybody!! i have got a probleme with my megajolt. he possesses a hard limiter interne but I can not seem to make it work. When i put the wire "power coil" of mgjlt over positive coil pack, i havent got a spark, but when i put the 12v generaly over my coil pack i have got the spark and I can control the advance with the megajolt.

then i have control wire voltage of "power coil" mgjlt i have got a 12v but i have got 9 volt when i try started motor.

View user's profile Send private message AIM Address
Reply with quote
Post  
Hello Adrien,

We apologize for the late reply.

Can you post pictures of how you wired the Rev Limiter to the Megajolt?

Also, with the engine turned to "ON", but not running (so the megajolt is powered up). Measure the voltage at "COIL_POWER". What do you measure?


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
hello , thank's for the answer. when my engine turned to "on" but no running I measure 12volt . but when turned to "on" and try started y have got 9 volt.

View user's profile Send private message AIM Address
Reply with quote
Post  
When you connect the coil pack directly to 12V, how many volts do you see when cranking?

Also, please post pictures of the Hard Rev Limiter wiring.

Thank you,


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
hello, here is the picture I hope it suits you. but i don't understand your previous question
[img]DSC00960[/img]

View user's profile Send private message AIM Address
Reply with quote
Post  
Just a bump because I have the same problem. When powered directly I measure cranking voltage at the coil but when powered through the Rev Limiter it cuts another 2 volts out.

View user's profile Send private message
Reply with quote
Post  
tightwad wrote:
Just a bump because I have the same problem. When powered directly I measure cranking voltage at the coil but when powered through the Rev Limiter it cuts another 2 volts out.


I had two connections swapped...the trigger and ground, which cause my voltage drop.

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum