SensorX?

All sensor specific discussions! Temperature, pressure, steering angle, brake and throttle, etc. Post adaptations of OEM-style sensors, and also your clever DIY hacks and custom designs here too!

Moderators: JeffC, rdoherty, stieg

Post Reply
jakekooser
Posts: 64
Joined: Wed Apr 16, 2014 11:03 am
Location: Florida
Contact:

SensorX?

Post by jakekooser »

Does it exist yet? Want to start hooking more stuff up and don't want to have to reinvent the wheel if a good solution is already available.

jakekooser
Posts: 64
Joined: Wed Apr 16, 2014 11:03 am
Location: Florida
Contact:

Post by jakekooser »

anybody?

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Sorry for the late reply.

Jake, are you talking about the breakout board for RaceCapture/Pro ?

https://github.com/autosportlabs/SensorX

If so, we have a number of preliminary boards we can make available.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

jakekooser
Posts: 64
Joined: Wed Apr 16, 2014 11:03 am
Location: Florida
Contact:

Post by jakekooser »

Yes, that's the one. I would make it myself, but I don't have the equipment and time to figure that out right now.

But if you have them available,
Attachments
shut-up-and-take-my-money.png
shut-up-and-take-my-money.png (171.83 KiB) Viewed 1438 times

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Ha, thanks. I'll work to add it to the store tomorrow, along with some sensors and antennas.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

jakekooser
Posts: 64
Joined: Wed Apr 16, 2014 11:03 am
Location: Florida
Contact:

Post by jakekooser »

Sweet. I'm still going to finish wiring up my RPM permanently - for now. Might be re-doing the whole works later but right now I have the get the car back together for my next track day because I'm going to be out of town this week.

jakekooser
Posts: 64
Joined: Wed Apr 16, 2014 11:03 am
Location: Florida
Contact:

Post by jakekooser »

I don't see the SensorX on the store, did it make it?

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Here's the preliminary store entry; you can purchase today.

http://www.autosportlabs.com/product/se ... out-board/

The board is very small - about 1/2 x 2.5". It's designed to be mounted in-line and bundled with the wiring harness.

We took a photo but it is still stuck on our camera at the lab. Will upload today or tonight.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply