Live View

gizmodo · Post by **gizmodo** » Mon Aug 11, 2014 2:09 pm

Is there any way to monitor the sensors right now other than creating a log and opening it?

toga94m · Post by **toga94m** » Mon Aug 11, 2014 4:25 pm

I've been able to view sensors from the previous version droid app via bluetooth, even with the new firmware loaded. This link should still work - https://play.google.com/store/apps/deta ... acecapture

Once bluetooth connects and you see battery voltage above zero (indicating there's bluetooth communications happening) swipe left-to-right till you get the screen of green numbers.

Tom

momostallion · Post by **momostallion** » Mon Aug 11, 2014 5:32 pm

yea bluetooth + android app is the only way i know of.

gizmodo · Post by **gizmodo** » Tue Aug 12, 2014 2:44 pm

That's what I was afraid of. Unfortunately I don't have the bluetooth adapter.

toga94m · Post by **toga94m** » Tue Aug 12, 2014 4:55 pm

You could go back to the V1 firmware and RaceAnalyzer 1.x, which has sensor display thru the USB connection. I've been powering my RCP through the PC's USB cable forever, haven't gotten it wired into the car yet.

Post by **brentp** » Thu Aug 14, 2014 4:30 pm

Correct, the live view is in the upcoming dashboard mode. We'll have the beginnings of that in our next release.

Currently you can monitor data in the following ways:

-BT module
-Realtime Cellular module (via web)
-Record to logfile

I know these are sub optimal for some of you, so thanks for your patience while we improve on the beta software.