Have 10 x HC908KX8s

General Megajolt Questions and Answers

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
SteveW
Posts: 1
Joined: Tue Nov 18, 2014 3:36 pm

Have 10 x HC908KX8s

Post by SteveW »

Hi everyone.

I have 10 x HC908KX8s. I built a programmer board and programmed one of them with mjlJunior_V3.3.1.s19.

I then built a custom(reduced functionality) version of the V3 controller board to test the firmware.

However, although it passes the serial comms. loopback test, I can't communicate with the board.

Did I need to program the KX8 with a bootloader first? Of course it may be a problem with my custom board

but I can't find one yet. I've set the IRQ line, pin 4, to 5V so that the KX8 starts in User Mode.

Thanks in advance.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Yes, you need both the bootloader and app programmed for it to work correctly. Read up on the motorola / freescale documentation on how the bootloader works. Good luck!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply