"Timer Speed" OS X the same as "Clock divider

alangbaker · Post by **alangbaker** » Sun Jun 21, 2015 10:54 pm

It's frustrating that when I look at the page for installing and configuring my CoilX RPM signal conditioner, there are things I'm supposed to set that don't look the same as in the OS X version of RCP...

gizmodo · Post by **gizmodo** » Mon Jun 22, 2015 12:49 pm

That isn't an operating system issue. Clock Divider was in the old RaceAnalyzer application. It was renamed to "Timer Speed" in the new version.

alangbaker · Post by **alangbaker** » Mon Jun 22, 2015 5:27 pm

Then someone badly needs to update this page:

select RPM for channel Name
select a sample rate. 10 to 20Hz is usually a good value to start with.
in advanced settings, select Mode = RPM, Timer Options = CLOCK / 128, and pulse per revolution to match the number of cylinders.

http://www.autosportlabs.net/CoilX#Race ... figuration

[/quote]

Post by **brentp** » Mon Jun 22, 2015 9:40 pm

Yes, thank you! The CoilX page has been updated

http://autosportlabs.net/CoilX#RaceCapt ... figuration