Swapping VR+ and sensor shield to get a spark!?

All sensor specific discussions! Temperature, pressure, steering angle, brake and throttle, etc. Post adaptations of OEM-style sensors, and also your clever DIY hacks and custom designs here too!

Moderators: JeffC, rdoherty, stieg

Post Reply
twincamspit
Posts: 3
Joined: Sat Nov 22, 2008 4:44 pm
Location: Oldham, Lancs
Contact:

Swapping VR+ and sensor shield to get a spark!?

Post by twincamspit »

Can anyone explain why we've had to cross over the wires between the VR sensor shield and the VR+ output in order to get a spark from the EDIS? (the VR- is unaffected, still goes to pin 5)
Attachments
swapped.png
swapped.png (191.75 KiB) Viewed 7243 times
Spitfire MKIV with Fiat 132 DOHC engine/box, not much room for a trigger wheel!
http://s192.photobucket.com/albums/z225 ... fitted.jpg

Post Reply