COILX and GM 4pin HEI

All sensor specific discussions! Temperature, pressure, steering angle, brake and throttle, etc. Post adaptations of OEM-style sensors, and also your clever DIY hacks and custom designs here too!

Moderators: JeffC, rdoherty, stieg

Post Reply
PS14
Posts: 97
Joined: Fri Feb 12, 2016 11:27 pm
Location: NY

COILX and GM 4pin HEI

Post by PS14 »

Trying to get an RPM signal from a V-8 chevy with an older HEI 4pin distributor. I hooked up the COILX but get no data on RPM channel 1. I believe the HEI puts out a 12 PWM signal so I thought maybe I could run it directly to RPM channel one, but I know there are spikes and don't want to damage the RCP unit. I verified the grounds and +5v to the COILX. Any thoughts on how I could trouble shoot this without access to a scope? thanks.

Post Reply