RPM signal

All sensor specific discussions! Temperature, pressure, steering angle, brake and throttle, etc. Post adaptations of OEM-style sensors, and also your clever DIY hacks and custom designs here too!

Moderators: JeffC, rdoherty, stieg

Post Reply
palad
Posts: 1
Joined: Fri Nov 25, 2016 3:13 pm

RPM signal

Post by palad »

Hello

I'm wondering how can I get a one cilindre two stroke kart rpm signsl to read it in racecapture.
Anyone help me please ?

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

If the ignition module / coil is similar to a conventional coil on an automobile, then you might be able to use the CoilX module, here:

https://wiki.autosportlabs.com/CoilX

See the full information on this page. Otherwise, you'll need to generate a relatively clean RPM signal from your RPM trigger.

Hope this helps, let us know what you find out.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply