ShiftX2 wiring harness

Q&A For ShiftX2, RGB sequential shift light <a href="https://wiki.autosportlabs.com/ShiftX2">Installation and Operation Guide</a>
Post Reply
psfp
Posts: 49
Joined: Mon Aug 21, 2017 10:40 pm
Location: DF - Brazil

ShiftX2 wiring harness

Post by psfp »

Hi,

From left to right, the colors of the wires in the harness of my ShiftX2 are black, red, yellow and white. Looks like the black and red wires are inverted. Can you confirm the board pinout, from left to right, not considering the wire colors?

Paulo

gizmodo
Posts: 138
Joined: Mon Aug 05, 2013 10:22 pm

Post by gizmodo »

Here is mine. It is wired according to the install here: https://wiki.autosportlabs.com/ShiftX2
Attachments
CAM00288.jpg
CAM00288.jpg (78.81 KiB) Viewed 8554 times

brentp
Site Admin
Posts: 6281
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

If the color code does not match what's documented then it seems your wiring harness was manufactured incorrectly, sorry for the inconvenience!

I clarified the documentation here:
https://wiki.autosportlabs.com/ShiftX2#Pinout
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

psfp
Posts: 49
Joined: Mon Aug 21, 2017 10:40 pm
Location: DF - Brazil

Post by psfp »

Thanks, guys. I know it sounds obvious, but I wanted to be sure, so I won't fry anything.

Post Reply