RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 3 of 3
Goto page Previous  1, 2, 3
Raspberry Pi support - enables a hard-wired, dedicated dash
Author Message
Reply with quote
Post  
it wasn't darkweb, but "unsupported" is a better description. I chose the Waveshare 10.1 resistance touch LCD because I felt the 7" was to small for our type of cars. and I didn't want to have to use special gloves. I also liked that the pi attaches directly to it. it has the ads7846 chip and uses the hidinput.

do I need to do anything special with the rc.local file? does ether line need to be first?

sudo nano /etc/rc.local
ADD BEFORE EXIT0
python /home/pi/.off_button.py &
/opt/racecapture/boot_racecapture.sh pi

View user's profile Send private message
Reply with quote
Post  
Ah, I was confused there. Smile

Order shouldn't matter, I think.


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post RPI on all versions? 
Hi,

Will running the app on RPI work with Racecapture Pro Mk1 as well?

Thanks

View user's profile Send private message
Reply with quote
Post  
It should work in theory. Let us know how it goes!


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
Guys, I recorded a video to show how RCP app can be operated in Raspberry Pi using a wireless mini keyboard and touchpad combo. Check it out:

https://www.youtube.com/watch?v=b3tk3h51GNg


_________________
--Paulo
View user's profile Send private message
Reply with quote
Post  
"This video is unavailable"


Worth mentioning, next app version due out in a couple of weeks we'll have more keyboard shortcuts:

'd' -> navigates to dashboard
's' -> navigates to setup
'a' -> navigates to analysis
'p' -> navigates to app preferences
't' -> navigates to status
ctrl-q -> exit the app


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
Sorry, it was set private by mistake. Should be good now.

Good job on the keyboard shortcuts, looking forward to the new release.


_________________
--Paulo
View user's profile Send private message
Reply with quote
Post  
Very nice. So many channels of data!

What settings did you use to enable the mouse?


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
It was really simple (after I figured it out, of course Laughing )

I just added a "cursor = 1" row in Kivy's config.ini file


_________________
--Paulo
View user's profile Send private message
Reply with quote
Post  
That's great. Thanks for the demo!


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
Which version is this?

Just asking because 1.11.0 doesn't seem to be responding to these (and I've had no success getting a visible cursor for the mouse), but wanted to know if I should be waiting a little longer...

brentp wrote:

Worth mentioning, next app version due out in a couple of weeks we'll have more keyboard shortcuts:

'd' -> navigates to dashboard
's' -> navigates to setup
'a' -> navigates to analysis
'p' -> navigates to app preferences
't' -> navigates to status
ctrl-q -> exit the app


View user's profile Send private message
Reply with quote
Post  
psfp wrote:
It was really simple (after I figured it out, of course Laughing )

I just added a "cursor = 1" row in Kivy's config.ini file


In which section? I've tried all of the obvious places, but I don't see "cursor = 1" mentioned in any of the relevant Kivy documentation (did you mean show_cursor?)

View user's profile Send private message
Reply with quote
Post  
It will be in the 1.12.0 app due out in a week or two, gearing up for the release process now.


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
mikesmith wrote:
psfp wrote:
It was really simple (after I figured it out, of course Laughing )

I just added a "cursor = 1" row in Kivy's config.ini file


In which section? I've tried all of the obvious places, but I don't see "cursor = 1" mentioned in any of the relevant Kivy documentation (did you mean show_cursor?)


In modules section:


(to access this file you must type sudo nano /home/pi/.kivy/config.ini in command line)


_________________
--Paulo
View user's profile Send private message
Reply with quote
Post  
brentp wrote:
It will be in the 1.12.0 app due out in a week or two, gearing up for the release process now.


Thanks, I'll be looking out for it.

View user's profile Send private message
Display posts from previous:
Reply to topic Page 3 of 3
Goto page Previous  1, 2, 3
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum