RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
4 AnalogX on the same CAN bus
Author Message
Reply with quote
Post 4 AnalogX on the same CAN bus 
Jumpers on AnalogX lets you configure 4 AnalogX devices to run on the same CAN bus, agreed but I am confused which jumper you are talking about because the documentation for AnalogX does not specify some thing specific for 4 AnalogX together. Also how will we obtain CAN ID for each AnalogX input.

View user's profile Send private message
Reply with quote
Post  
Hi,

It is documented here:
https://wiki.autosportlabs.com/AnalogX#CAN_base_ID

The jumpers are on the bottom of the AnalogX board, and are labeled accordingly.

Hope this helps!


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
Is it possible to use 3 AnalogX on same CAN bus or it should be a pair of 4 ? Does it affect us in any case because 3 AnalogX will serve the purpose for me.

Thank you.

View user's profile Send private message
Reply with quote
Post  
You can use 1,2,3 or 4 AnalogX on the same CAN bus, by changing the jumper settings, documented in the WiKi.

Thanks,


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum