4 AnalogX on the same CAN bus

Q&A for AnalogX Analog to CAN interface. <a href="https://wiki.autosportlabs.com/AnalogX">Installation and Operation Guide</a>
Post Reply
Vrushabh
Posts: 22
Joined: Tue Apr 04, 2017 7:26 pm

4 AnalogX on the same CAN bus

Post by Vrushabh »

Jumpers on AnalogX lets you configure 4 AnalogX devices to run on the same CAN bus, agreed but I am confused which jumper you are talking about because the documentation for AnalogX does not specify some thing specific for 4 AnalogX together. Also how will we obtain CAN ID for each AnalogX input.

brentp
Site Admin
Posts: 6281
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi,

It is documented here:
https://wiki.autosportlabs.com/AnalogX#CAN_base_ID

The jumpers are on the bottom of the AnalogX board, and are labeled accordingly.

Hope this helps!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Vrushabh
Posts: 22
Joined: Tue Apr 04, 2017 7:26 pm

Post by Vrushabh »

Is it possible to use 3 AnalogX on same CAN bus or it should be a pair of 4 ? Does it affect us in any case because 3 AnalogX will serve the purpose for me.

Thank you.

brentp
Site Admin
Posts: 6281
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

You can use 1,2,3 or 4 AnalogX on the same CAN bus, by changing the jumper settings, documented in the WiKi.

Thanks,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply