RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Default Ignition MAP
Author Message
Reply with quote
Post Default Ignition MAP 
This is the MAP included by default with the MJLJ processor.

It is a 'safe' map that can work for boosted as well as normally aspirated engines.




FactoryDefaultMap.mjlj
 Description:

Download
 Filename:  FactoryDefaultMap.mjlj
 Filesize:  725 Bytes
 Downloaded:  4204 Time(s)


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
Brent,

I am re-building my carb setup engine which runs a tad rich at present and going from 1.4L to 1.6L + the new mild road camshafts.

My current map which was set on rolling road is on thread: https://forum.autosportlabs.com/viewtopic.php?t=5602

I need a safe map to:
1) run my cams in for 20 minutes stationary
2) run the new piston rings in for a few hundred miles before i take it to the rolling road.

Better to use the default map? I have used the default before on the 1.4 but that was only to get it to the rolling road.

The difference this time is I am building an engine that will need running in before I find it comfortable to take 100 miles to the rolling road.

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum