RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Powering an AnalogX
Author Message
Reply with quote
Post Powering an AnalogX 
Can the RJ45 port of my MK2 power the AnalogX thru pins 1 & 8? I know the instructions say to connect it to a switched ign source but wasn't sure if this applied when using a MK. thanks, Dave

View user's profile Send private message
Reply with quote
Post  
Found the answer in the Can bus integration documentation.

Important note for MK2: The +12v connection on the RJ45 is connected internally to the +12v on the terminal block on RaceCapture/Pro MK2. It's recommended you only power via one source - RJ45 or terminal block - if you have both connected at the same time, you may cause back-feeding of power through RaceCapture/Pro, which may cause damage to the unit. Note: RaceCapture/Pro MK3 has internal protection diodes which avoids this issue.

View user's profile Send private message
Reply with quote
Post  
Hi, looks like you figured it out.

On MK2 you'll be able to do power it via RJ45 as 12v is internally connected with the terminal block.


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum