RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
MXL Pista - Race Capture MKIII
Author Message
Reply with quote
Post MXL Pista - Race Capture MKIII 
I'm installing a used MXL Pista into my car. Last night, I got everything hooked up and running, but I didn't get any data to the race capture using the stock AIM mapping. Any advice on trouble shooting? This is an older unit (roughly 2011) so I'm wondering if there is some sort of cutoff point where Aim used different smartycam outputs or anything. This is all set up in Race Studio 2, which I hate, but I think I have the smartycam fields configured correctly. I'm only outputting 4 things - Oil Temp and PSI, Fuel PSI, and Coolant Temp.

Thanks for the help!

View user's profile Send private message
Reply with quote
Post  
Hi, You likely need to enable the SmartyCam output in the AIM settings. See the guide here:
https://wiki.autosportlabs.com/AIM_Integration_CAN_Mapping

Let us know if that works for you!


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
Thanks! This guide is well done. The issue ended up being the baud rate. I forgot to check that when I set it up, and the CAN mapping for the AIM devices doesn't change it automatically. Works well now.

View user's profile Send private message
Reply with quote
Post  
Great. Thanks for the update!


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum