Dash and Data from OBD2 serial

General Q&A specific to RaceCapture/Pro. For app related questions post in the RaceCapture App forum. also see the <a href="http://www.autosportlabs.net/RaceCapture">RaceCapture Information Page</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Mgoblue06
Posts: 1
Joined: Tue Aug 03, 2021 11:36 am

Dash and Data from OBD2 serial

Post by Mgoblue06 »

New here and not sure which forum this should be posted on.

Looking for put a digital dash in our 96 s10 used for Champ Car racing, and struck out on trying to get a HAltech ic-7 trying to work because our PCM sends data via serial connection through the OBD2 connector.

Is is possible that the legacy MK3 racecapture, plus a screen would accomplish what we are trying to do and read data via serial and be able to send it to a screen located on the steering column? We were thinking of getting an MK3 anyway to communicate with pit box.

Thanks!

John

brentp
Site Admin
Posts: 6282
Joined: Wed Jan 24, 2007 6:36 am

Re: Dash and Data from OBD2 serial

Post by brentp »

You mean a serial connection, like an RS232 connection?

If so, it may be possible if you understand the protocol. RaceCapture/Pro MK3 has an auxiliary RS232 connection that you can access via lua scripting.

We have an example of that communicating with the older RaceTechnology DL1 data loggers via the RS232 serial ports:
https://gist.github.com/brentpicasso/45 ... b13c84f983

This is an advanced topic; you will need to have software developer skills, or find someone who can help you.

Good luck, let us know how it goes!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply