Megajolt with a Distributor

General Megajolt Questions and Answers

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
bbs16
Posts: 1
Joined: Fri Nov 04, 2022 10:20 am

Megajolt with a Distributor

Post by bbs16 »

Apologies if this has been covered somewhere.

I'm running a 4 cyl twin cam ford engine and am wondering if the Megajolt will work without the Edis and the 36 tooth wheel?
I've a Lucas distributor with a 4x tooth magnetic rotor and the VR sensor inside and a spare Motec CDI box and coil, and I'm wondering if the unit can be configured to accept the output of the sensor with only 4 pulses and trigger the CDI box. Was thinking of using the MSD 6al2 but was wondering if this could be an option of a programmable ignition?

Thanks in Advance............

brentp
Site Admin
Posts: 6282
Joined: Wed Jan 24, 2007 6:36 am

Re: Megajolt with a Distributor

Post by brentp »

Hi, it only works with the EDIS module and the crank trigger wheel, as per the conventional installation.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply