I am actively working on MJLJ version 2.1.
Features include:
** On the fly switchable ignition configurations.
- A line will be brought out to the molex connector where a toggle switch can be connected to switch between 2 different configurations on the fly.
** Interpolation between igntion configuration points
** Soft Rev limit before hard "cut"
- when the RPM approaches the preset Rev limit, the ignition advance will go to zero 500 RPM before the hard rev limit.
** TPS support- +5v and VREF will be brought out to the molex connector.
** A revised board with reduced parts count.
I will ensure that existing V 2.X.X boards will be compatible with the new firmware, and to get the new hardware features will require some patching of the circuit board.
ETA? I should have an ETA on the ETA within a week.
