RPM reading when engine turned off

Information and announcements on updates to the Megajolt firmware and PC software

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
SRandle
Posts: 3
Joined: Wed Oct 27, 2004 3:40 pm
Location: Rugby England
Contact:

RPM reading when engine turned off

Post by SRandle »

On flashing a working chip to the beta version and only connected to laptop I get an error when running java program which states RPM values out of range. I ignore this error and go into setting and notice the RPM value is 457. Any ideas before I plug into car. On flashing chip to old firmware its zero.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Did this repeatedly happen wh

Post by brentp »

Did this repeatedly happen when you would run the tuning program? You should be able to read and write the configuration with no problems.

Brent
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

SRandle
Posts: 3
Joined: Wed Oct 27, 2004 3:40 pm
Location: Rugby England
Contact:

Yes

Post by SRandle »

Sorry for long delay in writting reply.

Every time I switch off and on again the RPM reads around 400. When running does not seam a problem it appears normal. I will say the beta versions appears much better.

Post Reply