Hooking up Megajolt to Haltech or Electromotive EFI

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
knastenrad
Posts: 9
Joined: Wed Feb 09, 2005 5:33 pm

Hooking up Megajolt to Haltech or Electromotive EFI

Post by knastenrad »

Since the Haltech uses the Coil signal to fire the Injectors... is it only to use tach output from MEgajolt to hook them together??
Top
Todd Charles
Posts: 2
Joined: Mon May 24, 2004 5:08 pm

I would think it should work.

Post by Todd Charles »

I would think it should work. You have 4 different ways of hooking up a tach signal. MJLJ output, EDIS output, David Withers diode circuit or Josh B's new tach circuit. I can't beleive one of these would not work.

Todd
Top
knastenrad
Posts: 9
Joined: Wed Feb 09, 2005 5:33 pm

Thx! Yes it sounds promising

Post by knastenrad »

Thx!
Yes it sounds promising.
:)

but anyone actually done this?
Top
Post Reply

Return to “Installation”