RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Installed on Version 2 board
Author Message
Reply with quote
Post Installed on Version 2 board 
Received my beta test unit from Brent yesterday.

As I'm using a version 2 board, I thought I would show my installation method.

I've gone for the hard wired approach, just incase the screw connectors came loose later.


board with screw connectors removed and replaced with wires.

To make the connection at the megajolt end, I cut the pin that was used as rev cut out and reconnected the rev limiter trigger to the pcb, the pin now can be used as power out to the coil. this will mean a quick re-make of the wiring loom but shouldn't be too bad to do, once the rain/snow stops.


As the box I'm using is non-standard part, I fixed the rev limiter to an offcut of a plastic card, and slipped it into the spare slots inside the case.




Last edited by Ken555 on Sun Mar 16, 2008 12:40 am; edited 1 time in total

_________________

View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Reply with quote
Post  
Nice work! Post up once you have it running.

View user's profile Send private message Send e-mail
Reply with quote
Post  
Well the rain stopped long enough to allow me to retrieve the loom inside.
Once unwrapped I added a new wire to feed the coil pack, from the rev limiter, rather than the 12V supply line.
A few minutes later it was re-wrapped and ready to refit.





Last edited by Ken555 on Sun Mar 16, 2008 12:41 am; edited 1 time in total

_________________

View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Reply with quote
Post  
Excellent work!

Did you have a chance to road test it yet? Test carefully and gradually. Smile


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum