brent
Do you have any information on how to connect up a relay and what type to use for the rev limiter??
1= Dose it need to be a partiular type of relay
2= Were to conect it to coil+ or coil-
3= Dose it have to be fused
hope you can help me. have already tried my omex rev limiter but it didn't work,it burnt out that small circuit that puts the 2 coils to one to drive the tacho.realy do need to get it working as i don't wish to blow the engine when i am rallying down a forest track.
Cheers
RICH
PS anyone out the in the Derbyshire area that has fitted a mega jolt system?? I'm needing someone to help me program my system as at the moment i am lacking a laptop and the knowlage..
Relay for rev limiter
Moderators: JeffC, rdoherty, stieg, brentp
Note, I've never implemented
Note, I've never implemented a rev limiter this way- the MJLJ only has a "rev limit enable" output, for an external circuit.
Now, My recommendation would be to find a solid state DC relay to implement this.
Another member sent me a design for a circuit that could be implemented as well. I'll work on getting that up on the website for others to review.
Brent
Now, My recommendation would be to find a solid state DC relay to implement this.
Another member sent me a design for a circuit that could be implemented as well. I'll work on getting that up on the website for others to review.
Brent