can I use a MAP sensor??

mrknighty · Post by **mrknighty** » Wed Feb 16, 2005 8:01 pm

Hi all

I've been look into mjl system and I'm sure it will improve performance/drivabley on my car.

I have got a peugeot 205 Gti on twin 45's carbs with a Piper 300 degree cam shaft, would it be ok to use the MAP sensor with this setup?

any help would be greatfully recived

John (UK)

Todd Charles · Post by **Todd Charles** » Fri Feb 18, 2005 6:03 pm

You could use the sensor but you will need to hook a vacume gauge up and see what you are running at idle and cruise. You may be better off with just a "mechanical advance" setting. You would still see improvement over stock.

Todd