RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Ford 1600 RS Turbo, Standard Engine, Intercooler
Author Message
Reply with quote
Post Ford 1600 RS Turbo, Standard Engine, Intercooler 
(Originally posted by flashrs1988)

Engine Mfg: Ford
Engine Code: 1600
Cylinders: 4
Displacement: 1600
Rev Limit: ??
TPS or MAP: MAP
Boosted or Normally Aspirated: Boosted
If Boosted- max Pressure (KPa): 175
Modifications: Cam, exhaust, intercooler
Chassis: ??
Notes:This is the current map I have been using for some time now and has been running fine, the engine is more or less standard, e.g. turbo, intercooler, cam, exhaust. But is running a K+N panel filter and -31 actuator. The boost has been raised from the standard 6-7 psi to now run 10-11 psi, I would point out that you are now on the very limit of the standard intercooler unless you live in a very, very cold country.
The map config has been set by trial and error. I would not say it’s 100% correct but would be a good starting point to get you up and running…..




v9rst1barmap.mjlj
 Description:

Download
 Filename:  v9rst1barmap.mjlj
 Filesize:  801 Bytes
 Downloaded:  979 Time(s)

View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum