RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
4AGE map, stock cams, dellortho dhla40
Author Message
Reply with quote
Post 4AGE map, stock cams, dellortho dhla40 
Here is mine map and I dont now does it right becouse my car have some misfire at 2-3K RPM. Can somebody try to repair if now how Very Happy

When I pull full trottile its go like crazy, if I pull trottle slow its has misfire and stop-go thing.

Eny sugestion?




4age maps.mjlj
 Description:

Download
 Filename:  4age maps.mjlj
 Filesize:  717 Bytes
 Downloaded:  1141 Time(s)

View user's profile Send private message
Reply with quote
Post  
i would suggest improving on your vr sensor mount initially. By the looks of it, it requires some structural strengthening


_________________
1310 A-series Mini, lightened and built myself. V4 board and loving it

Rasputin22 - The Mini Forum
Rasputin22 - MK1 Golf Forum

Megajolt repair for the UK available
View user's profile Send private message Send e-mail MSN Messenger
Reply with quote
Post  
Thanks, lot of people tell me that and it's problem for shure. I will do today and put some stronger profile of steel and try to make some triangle from two bolts and VR sensor. i will lett you now how progress.

View user's profile Send private message
Reply with quote
Post More info needed 
Vlladimir. I have the same setup in a Locost seven. I am having backfiring when I let off the peddle. Plus slow acceleration. Can we talk [email protected] I am in Phoenix AZ Can you send me the MAP in a PDF form. So I can compare it to the one I am using. What jetting did you use and where do you get Delorto parts.

View user's profile Send private message
Reply with quote
Post  
I get all my Dellorto parts from www.dellorto.co.uk. Amazing service, quick shipping, and they've got EVERYTHING Very Happy.

View user's profile Send private message
Reply with quote
Post Vladimir about 4AGE 
I found one problem. Fuel pressure on the side draft carbs is important. PLus they are racing carbs and not tractable for street use. They want to go from idle to high acceleration with very little mid range. I will go thru the MAP and see if I can make slight changers that can effect the midrange. If you note on acceleration, the indicator goes from high vacuum to very low, then recovers and upon deceleration goes back high. I might try lowering the advance at high deceleration to correct this.

View user's profile Send private message
Reply with quote
Post Vladimir on 4AGE MAP 
Hi Vladimir. I was never able to open the MAO. Can you resend it to me at [email protected] in PDF form. I ain't good at computers. Thanks. Since I wrote I leaned out the carbs and now have a light brown tip on the electrode and grounds. I checked the lineup of the timing belt cam pulley's and marks. All line up. I checked the exhaust system and intake. No leaks. I am still getting some backfiring on letoff. I am thinking using the EDIS can cause some as it is wasted spark. John

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum