My Ford Escort mk2

Show off your Megajolt installations, vehicles and action shots here!

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
dangerousdave
Posts: 11
Joined: Sat Oct 17, 2009 10:22 pm

My Ford Escort mk2

Post by dangerousdave »

Hi guys, was told to get some pics up so here they are.

1980 Escort mk2 Harrier, running 1620cc xflow, ported bvh, balanced bottom end, kent bcf2 cam, big bore manifold, twin 40 webers. Should be around 100-120bhp at best. Im planning to build a new bottom end up this winter though hoping for around 140bhp.

Shell was like a tea bag when i got it, all work done by me except for the filler....just couldnt get the hang of it and it needed lots! Lots of welding, roof, rear 1/4, inner and outer sills, chassis rails, you name it its been welded except the inner wings strangely they were mint! Its been 4 1/2 years so far and well worth the wait getting it finally finished the other month!

Runs 100% better on the mj, love it to bits so easy to install and use, and much better on fuel with the tps working and map adjusted to suit. Since fitting the 40's i havnt got round to sorting a tps mount so thats one for the winter! On the other hand the rev limiter board is the best £15 i have ever spent :mrgreen: Love the flames and gunshot noise!!

Enough talking heres some pics taken at castle coombe the other month
Attachments
The day i went to collect it!
The day i went to collect it!
DSCF0082.jpg (74.05 KiB) Viewed 14228 times
2009092823268716059Matts%20BBQ%20and%20BB%20129 (600 x 450).jpg
2009092823268716059Matts%20BBQ%20and%20BB%20129 (600 x 450).jpg (100.81 KiB) Viewed 14228 times
IMG_2559 (600 x 400).jpg
IMG_2559 (600 x 400).jpg (58.35 KiB) Viewed 14228 times
Last edited by dangerousdave on Sun Oct 18, 2009 2:32 pm, edited 1 time in total.

dangerousdave
Posts: 11
Joined: Sat Oct 17, 2009 10:22 pm

Post by dangerousdave »

Some more hope you like it!
Attachments
IMG_2601 (600 x 400).jpg
IMG_2601 (600 x 400).jpg (66.29 KiB) Viewed 14227 times
2009100219227803422IMG_0917 (600 x 400).jpg
2009100219227803422IMG_0917 (600 x 400).jpg (49.59 KiB) Viewed 14227 times

Steve d
Posts: 16
Joined: Wed Mar 04, 2009 8:04 am
Location: North Wales

Post by Steve d »

nice car

NITROPIXIE
Posts: 704
Joined: Sun Sep 07, 2008 1:54 pm
Location: Fareham, GB

Post by NITROPIXIE »

Very nice motor fella. Lots of work gone into that. I don't think you could get it running much lower than that, lol
1310 A-series Mini, lightened and built myself. V4 board and loving it

Rasputin22 - The Mini Forum
Rasputin22 - MK1 Golf Forum

Megajolt repair for the UK available

dangerousdave
Posts: 11
Joined: Sat Oct 17, 2009 10:22 pm

Post by dangerousdave »

Cheers guys! It can go a bit lower (its on coilovers all round) but its a nightmare with the speedhumps and i have split the sump already just hitting small dips in the road!!! The new engine will get a shallower bowl and baffles in the sump then its only the xmember that will hit!! :lol:

Post Reply