Citroën AX GT

Browse and share Ignition Configurations in this forum

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
bossie
Posts: 21
Joined: Sat Oct 25, 2008 9:24 pm
Location: Harderwijk - The Netherlands

Citroën AX GT

Post by bossie »

For my Citroën AX GT, with 1.4 engine, Solex 32/34 Z2 2-stage carburetor and Kentcams PT02 camshaft (284 degrees) I'm using the next ignition mapping. With this setup, it delivers up to 98,5 HP at 6.000 rpm and 132,6 NM torque at 4250 rpm.

Yesterday, when I was creating a mapping for a friend with an AX Sport, I noticed I made a mistake in this mapping. I took the wrong values for the vacuum advanced, they are doubled. But since it is working good, I will not change it.

Image
Attachments
mjlj-factory-adv-sheet-AX_GT.xls
Mapping used on Citroën AX GT 1.4
(53.5 KiB) Downloaded 760 times

Post Reply