Classic Mini - Heinz 57 - 1293 stage 3

Show off your Megajolt installations, vehicles and action shots here!

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
sizefive
Posts: 6
Joined: Wed Feb 09, 2011 5:47 pm
Location: Florida USA (Originally from England)

Classic Mini - Heinz 57 - 1293 stage 3

Post by sizefive »

Hello,

This is BHO my MJ powered Classic Mini.

1293 Stage 3 +020 high compression pistons, nitrocarburised crank, 544 cam, stage 3 head with 37/29 valves, centre oil pipe and 4 pin diff, lightened flywheel and uprated clutch.

Maniflow LCB RC40 center exit exhaust 6 point roll cage, rev limiter and shift light mounted in the ashtray, adjustable front geometry.

Alpine, infinity and MB quarts stereo. MJ + seperate MJ box for rev limiter board both mounted at top of passanger side footwell.

still work in progress - probably always a work in progress......
Attachments
shift light and MJ etc
shift light and MJ etc
3 in 1.JPG (81.48 KiB) Viewed 7187 times
4 in 1.JPG
4 in 1.JPG (77.73 KiB) Viewed 7187 times
driving by & got asked to park up...
driving by & got asked to park up...
IMAG0317.jpg (155.9 KiB) Viewed 7187 times

sizefive
Posts: 6
Joined: Wed Feb 09, 2011 5:47 pm
Location: Florida USA (Originally from England)

Classic Mini - Heinz 57 - 1293 stage 3

Post by sizefive »

Sensor and mount
Attachments
IMAG0380.jpg
IMAG0380.jpg (114.91 KiB) Viewed 7068 times
IMAG0377.jpg
IMAG0377.jpg (85.17 KiB) Viewed 7068 times
whoops :)
whoops :)
IMAG0378.jpg (109.13 KiB) Viewed 7068 times

Post Reply