Ignition Map Westfield 3.9 V8

julswesty468 · Post by **julswesty468** » Sun Dec 04, 2011 7:13 pm

Hi,

Does anyone have a useful Ignition map to get my Westfield going, as the vehicle is so light I'm after a little more advance than normal but anything to get the girl fired up would be rally appreciated.

The engine is in a mild state of tune, ported heads, hc pistons, mild cam and a 465 Holley. With the Dizzy fitted i ran 16 degrees of static which pushed it long fairly well.

Thank you for looking.

cng1 · Post by **cng1** » Sun Dec 04, 2011 9:56 pm

Hi Julian.

Did you buy the ECU from us? If so there are maps on the CD that should be good for your engine.

Chris

julswesty468 · Post by **julswesty468** » Wed Dec 14, 2011 10:37 pm

Hi Chris,

Thank you for replying to my post, I didn't get the ECU from you as it came to me via a Landrover lover who has swopped to a dirty diesel for off roading, however I have sourced brackets and tacho driver from you recently.

Is the CD something I can purchase from you also ?

Regards

Julian

cng1 · Post by **cng1** » Wed Dec 14, 2011 11:04 pm

Email us directly ([email protected]) and we'll sort you out with a map file.