TPS to MAP sensor???

General Megajolt Questions and Answers

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
fiestatony
Posts: 1
Joined: Wed May 07, 2014 12:21 am
Location: kettering, England

TPS to MAP sensor???

Post by fiestatony »

hi there guys and gals, I'm tony and just signed on forum :-). Hi.
Anyway..... I have been running tps previously and now need to run a map sensor
.. now then can I run an external Map sensor and wire it to the TPS wires that
are there already, or do I have to change internals of mj as mine does not have a hole
for vacuum take off...... PLEAS HELP ME
Thanks a lot in advance.
Tony :-)

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi Tony,

Apologies for the late reply. You can switch from TPS to an internal map sensor by soldering in a new sensor and modifying the end plate with a hole. Could you post a picture of the main board inside your Megajolt and we can advise you on how to do it?
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply