RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
MAP Connection
Author Message
Reply with quote
Post MAP Connection 
On a recent Rolling Road session the guy working on my car moved the MAP sensor tube from a take-off on the inlet manifold and put it on the vacuum connection on one of the carbs. I questioned this as MJ installation instructions says not to use the carb connection, he said in his experience it works better this way.

Should I leave the tube on the carbs or move back to the manifold?

View user's profile Send private message
Reply with quote
Post  
Hi,

So long as they provide a stable, smooth vacuum reading it should be fine. You can attach a manual vacuum gauge to the new location and watch for any pulses under varying RPMs.


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Reply with quote
Post  
Thanks Brent, will get a vacuum gauge and test it.

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum