Bluetooth connection bouncing against OS X client

Discussion on the RaceCapture App - Windows, Android, OSX and Linux.

Moderators: JeffC, stieg

Post Reply
reddogmotorsports
Posts: 2
Joined: Mon Jul 06, 2015 9:06 pm

Bluetooth connection bouncing against OS X client

Post by reddogmotorsports »

I am just getting around to working with my RCP/2 after leaving it on the shelf for six months. I hooked it up on the bench and flashed it with the latest firmware without incident. Running the device against the app over USB under OS X presents no problems, and everything seems to be working as expected.

However, when I disconnect the USB and run over bluetooth, the device cannot seem to remain connected to the computer via bluetooth without disconnecting after a couple seconds. It connects, disconnects, and reconnects continuously. Once or twice, it remained connected for a few seconds longer, but I don't believe I was able to actually receive telemetry.

I use a bluetooth keyboard with the OS X box exclusively, so it doesn't seem to be a problem with the controller, though obviously I cannot rule out an issue there.

Thanks for any pointers. :)

Post Reply