Best way to get more than 7 analog inputs?

Race Capture Pro hardware installation- power, wiring, physical installation, etc. See the dedicated forum for Sensor related topics

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Olaaf
Posts: 16
Joined: Wed Jan 29, 2014 2:50 am
Location: United States

Best way to get more than 7 analog inputs?

Post by Olaaf »

Is there an inexpensive device on the market that will take some additional inputs and put them on the CAN bus? There is the this board that i've used with megasquirt applications, but i'm not sure about the CAN parameters:

http://jbperf.com/io_extender/index.html

LDForget
Posts: 12
Joined: Wed Nov 02, 2016 11:58 pm

Re: Best way to get more than 7 analog inputs?

Post by LDForget »

Olaaf wrote:Is there an inexpensive device on the market that will take some additional inputs and put them on the CAN bus? There is the this board that i've used with megasquirt applications, but i'm not sure about the CAN parameters:

http://jbperf.com/io_extender/index.html
My plan is arduino with a can shield. I haven't completed it yet though.
Junction Auto Sport
ChumpCar Canada

wrandleman
Posts: 5
Joined: Fri May 09, 2014 10:22 pm

Post by wrandleman »

Before RaceCapture I was working on a home built logger using the OLIMEXINO-STM32. These have 5 analog to digital ports with good resolution and have CAN on board. https://www.amazon.com/OLIMEXINO-STM32- ... B007OTUWBM

Post Reply