Trasmit RCP3 GPS data over CAN BUS

Discussions on CAN mapping for ECUs, sensors, PDMs, and more.
Post Reply
anastos
Posts: 35
Joined: Fri Apr 14, 2017 4:31 am
Location: Wisconsin

Trasmit RCP3 GPS data over CAN BUS

Post by anastos »

I would like to share the GPS speed data from RCP3 with Megasquirt 3 via CAN.
How can I go about doing this? I have MS3 setup to broadcast data to RCP and it is working fine, I need to know how to identify the data of interest, and how to get RCP3 to transmit data to CAN BUS.
Thanks,
Anastos

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi, we have some good examples here for sending CAN messages: https://wiki.autosportlabs.com/RaceCapt ... us_scripts

Hope this helps.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

anastos
Posts: 35
Joined: Fri Apr 14, 2017 4:31 am
Location: Wisconsin

Post by anastos »

Thanks I'll try that. Somehow I missed that info in the wiki.
Thanks,
Anastos

Post Reply