Turning off Channels

Discussions on CAN mapping for ECUs, sensors, PDMs, and more.
Post Reply
rex-racer
Posts: 18
Joined: Mon Jun 12, 2017 9:35 pm

Turning off Channels

Post by rex-racer »

Brent, is there a way to have your listed of mapped channels and be able to turn them off without deleting the channel itself?

For instance, I have the IZZE tire temp sensors. Let's say I want them in the 16 channel format but only want to log 4 channels of my choosing. I would like to see that data on Podium but not all the blank channels cluttering up the display. I would like to have them in the CAN channel mapping should I choose to turn channel on and off without having to delete and re-add the channels.

Is this currently possible?
A Race Car exists in 2 states: Broken or in the process of becoming that way.

rex-racer
Posts: 18
Joined: Mon Jun 12, 2017 9:35 pm

Post by rex-racer »

I figured this out. All you do is set the refresh rate to "disable" and that kills the channel on Podium....exactly what I was wanting to do.
A Race Car exists in 2 states: Broken or in the process of becoming that way.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Glad you figured it out! Yes, you can have the mapping in place, but disable it on the spot without actually deleting the mapping.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply