RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Gauges change colors late, one cycle after the current value
Author Message
Reply with quote
Post Gauges change colors late, one cycle after the current value 
Im running RC on a Fire8 tablet.
I've got gauges configure to change colors via value ranges.

For example, an RPM gauge:
0-750 - white
750 - 6000 green
6000-> red

Im bench testing my RCP setup with an Arduino which sends CAN packets. What I see in testing is that the color of the gauges do not change correctly until one packet AFTER going over the limits.

For example:
packet1(RPM = 5500) - gauge is green
packet2(RPM = 6100) - gauge is green (!!))
packet3(RPM = 6300) - gauge turns red.
packet4(RPM = 100) - gauge is red
packet5(RPM = 600) - gauge turns white

I've reproduced this with a variety of gauges on the dash at a variety of CAN packet speeds.

View user's profile Send private message
Reply with quote
Post  
Hi, Thanks for the note. We will investigate and see if we can reproduce it.


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum