(1.9.0) Various CAN mapping issues

Found a bug or got a feature request? Post it here.
Post Reply
thoraxe
Posts: 47
Joined: Wed Dec 14, 2016 2:29 am
Location: Atlanta, GA
Contact:

(1.9.0) Various CAN mapping issues

Post by thoraxe »

Issue #1:
I created a can mapping for MAP.
* I can't change the units, precision, or any settings with the customize gear. If I change the units, hit check, hit check again, and then edit the channel, the change is immediately gone.

Issue #2:
If I create a CAN mapping and immediately customize it to have a name of Manifold, with various settings, I cannot insert this on the dashboard.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

This does not reproduce for us. Hi Erik, does the channel editing issue reproduce with the latest version? you can install different versions side by side on windows, FYI. Does it happen on Android?

The channel won't be available in the list of available channels in dashboard until the config is written to the RaceCapture device.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

thoraxe
Posts: 47
Joined: Wed Dec 14, 2016 2:29 am
Location: Atlanta, GA
Contact:

Post by thoraxe »

I'm trying to program offline. No unit is connected. I'm getting everything set up so I can go to the shop next week and dump the program into the unit.

I'd like to be able to set and configure everything without being connected.

I'll install the latest and give that a try. The CAN mapping section didn't have the same crashing issue.

thoraxe
Posts: 47
Joined: Wed Dec 14, 2016 2:29 am
Location: Atlanta, GA
Contact:

Post by thoraxe »

100% reproducible in 1.11:

* Open 1.11 program - NO LOGGER CONNECTED
* Open attached file (rename because .rcp attachments not allowed)
* Go to setup
* Go to CAN mapping
* Click +
* Click Channel
* Select MAP from dropdown
* Set rate to 50Hz (probably not relevant)
* Click Gear next to MAP channel
* Change Units to PSI
* Click Check
* Click Check
* Click edit for mapped MAP channel
* Click gear

Actual behavior:
* Shows KPa (default)

Expected behavior:
* Shows PSI (changed setting)
Attachments
reproducer-canmap.zip
Reproducer RCP file
(2.07 KiB) Downloaded 80 times

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi, does this reproduce in the new 1.12.0 beta app?
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

thoraxe
Posts: 47
Joined: Wed Dec 14, 2016 2:29 am
Location: Atlanta, GA
Contact:

Post by thoraxe »

brentp wrote:Hi, does this reproduce in the new 1.12.0 beta app?
It reproduces exactly.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi, Unfortunately, we cannot reproduce this, yet.

Could you do a video capture of your desktop doing this to see it in action?

Thanks,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply