Disable CAN termination?
Moderators: JeffC, rdoherty, stieg, brentp
Disable CAN termination?
Is it possible to disable the internal CAN termination? I don't see anything in the software.
Hi,
Depends on the hardware version.
RaceCapture/Pro MK2 requires disabling hardware jumpers on board.
https://wiki.autosportlabs.com/RaceCapt ... ermination
RaceCapture/Track also has a jumper to enable or disable termination.
RaceCapture/Pro MK3, RaceCapture/Apex and PodiumConnect all have software controllable termination, configurable on the CAN bus screen under setup.
Hope this helps!
Depends on the hardware version.
RaceCapture/Pro MK2 requires disabling hardware jumpers on board.
https://wiki.autosportlabs.com/RaceCapt ... ermination
RaceCapture/Track also has a jumper to enable or disable termination.
RaceCapture/Pro MK3, RaceCapture/Apex and PodiumConnect all have software controllable termination, configurable on the CAN bus screen under setup.
Hope this helps!