Setting ADC values in Aux input options

General Topics for configuring, operating and tuning the Megajolt. Also see the <a href="http://www.autosportlabs.net/MJLJ_V4_Operation_Guide">Operation Guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
BGTSpitfire
Posts: 10
Joined: Fri Jan 05, 2018 9:51 pm

Setting ADC values in Aux input options

Post by BGTSpitfire »

I'm datalogging with an AEM AFR gauge and the Megajolt configurator. My problem is I want the gauge to read AFR instead of 0 to 255. The AEM instructions tell you how to set it up with their datalogger but it doesn't work with the Megajolt configurator. The scaled value is the only thig that can be changed but to what? This is the last piece of the puzzle.

Thanks

BGTSpitfire
Posts: 10
Joined: Fri Jan 05, 2018 9:51 pm

Post by BGTSpitfire »

Ok I found this calibration file and I think I loaded it. viewtopic.php?t=2072&highlight=wideband But My AFR gauge is still reading 0 to 255. I know it's something simple.

Post Reply