VR Sensor and missing tooth position

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
damunk
Posts: 61
Joined: Mon Aug 05, 2013 8:44 pm

VR Sensor and missing tooth position

Post by damunk »

I have two questions;



1) There are two pins on the VR Sensor. Ground and signal.
I have just noticed I had mine wired the wrong way around.

2) On my old build I was a tooth out (10 degrees) but car was tuned on rolling road without a degree offset.


How did the car run?

brentp
Site Admin
Posts: 5955
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi,

Unsure how your car was running if you had the VR sensor connected backwards!

For reference, the guide for the trigger wheel alignment is here:
https://wiki.autosportlabs.com/MJLJ_V4_ ... tion_guide
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply