Hard cut wiring mk2

Discussion on the Hard Rev Limiter module, currently under beta testing. <a href="http://www.autosportlabs.net/Hard_rev_limiter_1.1.0">Project Information</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Site Admin
Posts: 6281
Joined: Wed Jan 24, 2007 6:36 am

Re: Hard cut wiring mk2

Post by brentp »

When hard rev limiter is enabled, you'd power the coil pack via the red connection in the upper left of the diagram, instead of via 12v. This allows the hard rev limiter to reduce power to the coils when the hard rev limiter is active.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply