Am up to installing the transistors, Where is this reference picture, the one at the bottom of the book/installation page is not clear enough to see what side they are faceing.
Ron Triano
Where is reference picture
Moderators: JeffC, rdoherty, stieg, brentp
Transistor alignment
Looking at the board with Q6 at the bottom, the transistors should all be aligned (except Q4) with the flat side facing the bottom right corner. /
The middle lead is then bent slightly toward the flat side to fit the three holes.
The middle lead is then bent slightly toward the flat side to fit the three holes.
Transistor alignment
Thankyou very much.
Ron Triano
Ron Triano