Bluetooth - Error Initializing

Q&A for the RaceCapture Plug & Play - general hardware related usage and operation; for app related questions please post in the RaceCapture app section.

also see the <a href="">RaceCapture quick start guide</a>
Post Reply
Posts: 1
Joined: Sun Sep 15, 2019 11:01 pm

Bluetooth - Error Initializing

Post by Platinum997 »

Racecapture Track MK2

Wifi works fine but bluetooth does not work. Under System Staus /Bluetooth, Status =Error Initializing

Have tried downgrading/upgrading firmware, disabling wifi module, CAN Bus, CAN Mapping and OBDII, same results.

let me know what else to try.

Site Admin
Posts: 6280
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »


Thanks for the note. Please check that you have the correct firmware flashed - it should say RaceCapture/Track MK2 in the upper right when connecting. We only recently added guards in the app to prevent accidental flashing of incorrect firmware, so it is worth checking.

If it does report RaceCapture/Track MK2, then please contact [email protected] for support and we will get it repaired for you.

Thank you,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply