RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
A Trigger Wheel for Small Block Guys on the Cheap
Author Message
Reply with quote
Post A Trigger Wheel for Small Block Guys on the Cheap 
I installed this last summer and it has been working flawlessly. I have minimal fabricating
skills and was able to do this in about 2 hours.

I made my own 36-1 trigger wheel out of my 3 grove crank pulley. Since the back groove
is not used in my setup, I turned the back of the pulley into my trigger wheel. I found and
printed off a 360 wheel marked every 5 degrees. Took a little time to find and re-size to
fit my pulley perfectly. I taped it to the pulley and marked it every 5 and then used an
angle grinder to cut my teeth. Its not perfect, but she runs like a champ!!

Making the trigger wheel.
http://i283.photobucket.com/albums/kk298/SleepingBlazer/DSCF1017.jpg?t=1285030147
Trigger wheel completed.
http://i283.photobucket.com/albums/kk298/SleepingBlazer/DSCF1020.jpg?t=1285030093

Trigger wheel installed with VR sensor.
http://i283.photobucket.com/albums/kk298/SleepingBlazer/DSCF1026.jpg?t=1285030058
http://i283.photobucket.com/albums/kk298/SleepingBlazer/DSCF1023.jpg?t=1285030263

View user's profile Send private message
Reply with quote
Post  
Great idea and congratulations for not slipping with the angle grinder! At least you won't have any problems with it coming loose!

View user's profile Send private message
Reply with quote
Post  
Now that's using your head! Great idea.

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum