Aux input - temp sensor

[mattwrigg]

Hi there

I have in my cupboard a temp sensor which I think is from a land rover of sorts. I would like to find out if it can be used as the aux input sensor.

I've checked the sensor resistance with a multi meter as follows:
boiling(ish) water: 334 ohms
room temp: 2000 ohms
bag of frozen peas: 8.0 on the 20k scale

Can anyone give me some guidance? I'm waiting for a USB-serial convertor to come from the Autosport labs so I can't connect to the MJunit yet to see what it would say if the sensor was connected up.

Thanks
Matt