RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 2 of 2
Goto page Previous  1, 2
Firmware development toolchain details
Author Message
Reply with quote
Post  
I've just hooked the USB cable to my PC (also supplies power), then run putty (a terminal/ssh program) connecting to the COMx port where the RCP lives, connect at 115200 baud 8N1, and hit ENTER to get a menu. You can change loglevel to tell RCP how much information to spew across the serial link. I also tried to get it working under linux, under virtualbox, but the emulation of linux seems to be too time-consuming for the serial port to work reliably that way.

Code:

RaceCapture/Pro >

===================================================
Welcome to RaceCapture/Pro : Firmware Version 2.7.6
===================================================

Available Commands:

resetConfig   : Resets All configuration Data to factory default Usage: resetConfig
testSD        : Test Write to SD card. Usage: testSD <lineWrites> <periodicFlush> <quietMode>
startTerminal : Starts a debugging terminal session on the specified port. Usage: startTerminal <port> <baud> [echo 1|0]
viewLog       : Prints out logging messages to the terminal as they happen Usage: viewLog
setLogLevel   : Sets the log level Usage: setLogLevel <level>
logGpsData    : Enables logging of raw GPS data from the GPS Mouse Usage: logGpsData <1|0>
showTasks     : Show status of running tasks Usage: showTasks
version       : Gets the version numbers Usage: version
showStats     : Info on system statistics. Usage: showStats
sysReset      : Reset the system Usage: sysReset
lua           : Enter the lua script interpreter. Usage: lua
reloadScript  : Reloads the current script. Usage: reloadScript
RaceCapture/Pro > setLogLevel 5
result="ok";
RaceCapture/Pro >



_________________
------------
Learning Race Capture Pro... on someone else's car
Learning Python/Kivy on my own PC
View user's profile Send private message
Reply with quote
Post  
brentp wrote:
We're using http://www.gnuarm.com/

Keep us posted on the work you're doing! Smile


That website evaporated/expired... or is it this?
https://sourceforge.net/projects/gnuarmeclipse/

The RCP readme shows building requirements for MK2, what's the current setup for MK1? I figure if I can build/run my own fork, I'll spend less time pestering you guys trying to learn/debug stuff. Smile


_________________
------------
Learning Race Capture Pro... on someone else's car
Learning Python/Kivy on my own PC
View user's profile Send private message
Display posts from previous:
Reply to topic Page 2 of 2
Goto page Previous  1, 2
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum