RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Bluetooth connection bouncing against OS X client
Author Message
Reply with quote
Post Bluetooth connection bouncing against OS X client 
I am just getting around to working with my RCP/2 after leaving it on the shelf for six months. I hooked it up on the bench and flashed it with the latest firmware without incident. Running the device against the app over USB under OS X presents no problems, and everything seems to be working as expected.

However, when I disconnect the USB and run over bluetooth, the device cannot seem to remain connected to the computer via bluetooth without disconnecting after a couple seconds. It connects, disconnects, and reconnects continuously. Once or twice, it remained connected for a few seconds longer, but I don't believe I was able to actually receive telemetry.

I use a bluetooth keyboard with the OS X box exclusively, so it doesn't seem to be a problem with the controller, though obviously I cannot rule out an issue there.

Thanks for any pointers. Smile

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum