RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
Logging custom CAN-messages
Author Message
Reply with quote
Post Logging custom CAN-messages 
Hi, first post on the forum! Smile
I would like to log custom received CAN messages and have after a few days of testing and searching not been able to find anything relevant. I thought about editing the source code, but thought I should consult all the knowledge on the forum first.
I am part of a research group who is building a small hybrid car, we have an established CAN-network used between the ECUs controlling the electrical motor, the ethanol engine and a bunch of other stuff. My question is how should I get the custom messages to be logged by the RCP2?
I have tried to use the existing predefined OBD-II channels but this have been unsuccessful since I can't set the channel to an custom CAN id.
I have written a lua-script to make sure that the messages is beeing recieved properly and that works fine.

Thanks for your input!

View user's profile Send private message
Reply with quote
Post  
Hi,

Our CAN integration is done through Lua, mapping CAN data to virtual channels. You don't need to modify firmware.

See the guide:
https://wiki.autosportlabs.com/CAN_Bus_Integration

One great example is the BMW E46 integration:
https://wiki.autosportlabs.com/BMW_E46_CAN

Let us know how your project goes!


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum