RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
MXG + STACK TPMS + RaceCapture
Author Message
Reply with quote
Post MXG + STACK TPMS + RaceCapture 
Hi guys,


I have the STACK TPMS connected to the CAN2 network on the AIM MXG (CAN1 for the ECU) and it is woriking good. Both channels from ECU and TPMS are beign readed and recorded by the MXG.

My RCP is connected to a Data Hub (using AIM dashboard telemetry cable) which is connected to the CAN EXP port of the MXG.

I'm running the AIM SmartyCam preset but nothing is transmitted / received by RCP (except from the internal channels like yaw, pitch, roll, etc). I'm lost after two days trying everything.

Could be different the CAN mapping from the oldest AIM (Like MXL pista) products from the new ones (MXL2, MXG) ?
Someone running RCP with MXG, MXS, MXL2 could provide some advice?
How could I verify if RCP is receiving something from the MXG?

Thanks!

View user's profile Send private message
Reply with quote
Post  
Hi, Let's confirm you have things working correctly in the other thread before diagnosing CAN bus communications. We can do a CAN loopback test afterwards, and some other tests as well.

Thanks,


_________________
Brent Picasso
Founder, Autosport Labs
Facebook | Twitter
View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum